Torque Converter 1″ (25.4mm)
$150.00
Description
Complete Torque converter kit
- Suits standard 25.4mm (1”) drive shaft
- 5/8” bore driven pully 6” Diameter
- Drive Belt: 3/4″ Top Width – Asymmetrical
- Keyway 6mm
- Aluminium mounting back plate + Plastic cover
- Choose one of the sprockets below – Random if not selected
- 1st sprocket: 10 tooth suitable for 420 chain
- 2nd sprocket 12 tooth suitable for 35 chain
- Drive Clutch Engagement: 2200 RPM
- Application up to 11HP engines GX270
Expect approximately 2.7:1 initial reduction of your gear ratio upon take-off, then the torque converter will progressively move through to a final drive of approximately 0.90:1 (overdriven) at full speed. This allows use of taller gearing on the rear without acceleration issues.
